6.35mm Pitch Wire To Wire Connector Triple Row C6350HF A Type Lock Wire Housing
1, Detailed information of product feature
| Basic dimension information |
| Pitch |
6.35mm |
| Color |
White |
| Row |
Triple(3 rows) |
| Bump |
Without |
| Gender |
Male |
| Application |
Power, wire-to-wire |
| Wire range |
AWG20# to 14# |
| Wire insulation diameter |
3.30mm Max |
| Terminal materials |
Brass material, tin-plated finish |
|
Terminal Package
|
4000pcs/reel |
|
Terminal processing method
|
E-stamping before tin-plated |
| Matched part |
C6350HM series triple row housing |
| |
| Electrical properties |
| Current Rating |
15A AC, DC |
| Voltage Rating |
600V AC, DC |
| Contact Resistance |
3.5mΩ Max |
| Insulation Resistance |
1000mΩ min |
| Withstanding Voltage |
5000V AC/minute |
| |
| Mechanical properties |
| Temperature range |
-25℃ to 85 ℃ |
| Terminal Insertion Force |
2.30kgf (Max.) |
| Terminal/Housing Retention Force |
3.00kgf (Min.) |
| Pin Retention Force |
1.80kgf (Min.) |
| Latch Yield Strength |
16.0kgf (Min.) |
| |
| Other information please kindly check the following picture. |
2, Introduction for this series products
Please kindly notice that the C6350 series product, if you can buy this product as a set, the price will be very reasonale and favorable.
1, Terminals:C6350F-T and C6350M-T
2, Housing: Male housing type C6350HF-NP & C6350HF-3XNP
Female housing type C6350HM-NP & C6350HM-3XNP
3, Related drawing and report
Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.
Dimension drawing
Testing report
|
1. Scope
This specification covers the requirements for product performance of 6.35mm pitch wire to wire
connectors series.
2. Construction,Dimensions,Material & Plating
See the attached drawings
3. Ratings & Applicable Wires
| Item |
Standard |
| Rated Voltage (Max.) |
600V AC/DC |
Insulation O.D. 3.30mm (Max.) |
| Rated Current (Max.) And Applicable Wires |
AWG#14 |
15A AC/DC |
| AWG#16 |
12A AC/DC |
| AWG#18 |
10A AC/DC |
| AWG#20 |
8A AC/DC |
| Ambient Temperature Range |
-25℃ ~ +85℃* |
*: Including terminal temperature rise
4. Electrical Performance
| Test Description |
Procedure |
Requirement |
| 4-1 |
Contact Resistance
|
Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) |
3.50mΩ (Max.) |
| 4-2 |
Insulation Resistance |
Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) |
1000MΩ (Min.) |
| 4-3 |
Dielectric Withstanding Voltage |
Mate connectors, apply 5000V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) |
No Breakdown. |
| 4-4 |
Contact Resistance on Crimped Portion |
Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.), 10mA. |
5mΩ (Max.) |
5. Mechanical Performance
| Test Description |
Procedure |
Requirement |
| 5-1 |
Actuator Insertion & Withdrawal Force |
Insert and withdraw connectors at the speed rate of 25±3mm / minute. |
Refer to paragraph 7 |
| 5-2 |
Crimping Pull Out Force |
Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) |
AWG#14 |
11.0kgf (Min) |
| AWG#16 |
10.0kgf (Min) |
| AWG#18 |
9.0kgf (Min) |
| AWG#20 |
6.0kgf (Min) |
| 5-3 |
Terminal Insertion Force. |
Insert the crimped terminal into the housing. |
2.30kgf (Max.) |
| 5-4 |
Terminal/Housing Retention Force. |
Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. |
3.00kgf (Min.) |
| 5-5 |
Latch Yield Strength |
Mate connectors and pull apart until both latches break at the speed rate of
25±3mm / minute
|
16.0kgf (Min.) |
| 5-6 |
Panel Mount Retention Force |
Insert the housing into panel cut out, push housing opposite the way it was assembled until the locking barbs break at the speed rate of 25±3mm / minute. |
34.0kgf (Min.) |
| 5-7 |
Durability |
When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. |
Contact Resistance 7mΩ (Max.) |
| 5-8 |
Vibration |
Amplitude: 1.5mm P-P
Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.
(Based upon MIL-STD-202 Method 201A)
|
Appearance No Damage.
Contact Resistance 7mΩ (Max.)
Discontinuity 1 μsec.(Max.)
|
| 5-9 |
Physical Shock |
490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
|
|
6. Environmental Performance And Others
| Test Description |
Procedure |
Requirement |
| 6-1 |
Temperature Rise |
Carrying rated current load.(Based upon UL 498) |
30℃(Max.) |
| 6-2 |
Heat Resistance |
85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage.
Contact Resistance 7mΩ (Max.)
|
| 6-3 |
Cold Resistance |
-25±3℃,96 hours (Based upon JIS C0020) |
| 6-4 |
Humidity |
Temperature: 40±2℃
Relative Humidity : 90~95%
Duration: 96 hours
(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)
|
Appearance No Damage.
Contact Resistance 7mΩ (Max.)
Insulation Resistance 100MΩ (Min.)
Dielectric Withstanding Voltage Must meet 4-3
|
| 6-5 |
Temperature Cycling |
5 cycles of:
a) -55℃ 30 minutes
b) +85℃ 30 minutes
(Based upon JIS C0025)
|
Appearance No Damage.
Contact Resistance 7mΩ (Max.)
|
| 6-6 |
Salt Spray |
Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B) |
| 6-7 |
SO2 Gas |
24 hours exposure to 50±5ppm.
SO2 gas at 40±2℃.
|
| 6-8 |
NH3 Gas |
40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
7. Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits |
At Initial |
| Insertion (Max.) |
Withdrawal (Min.) |
| Single |
0.80 |
0.23 |
| 02 |
1.60 |
0.46 |
| 03 |
2.40 |
0.69 |
| 04 |
3.20 |
0.92 |
| 05 |
4.00 |
1.15 |
| 06 |
4.80 |
1.38 |
| 08 |
6.40 |
1.84 |
| 09 |
7.20 |
2.07 |
| 12 |
9.60 |
2.76 |
| 15 |
12.00 |
3.45 |
|
4, Why choose us
1). High Reputation: We are a professional & realiable electronics connector, wafer, termianl manufacturer with 12 years experience, who has owned high reputation in this field.
2). Famous Exhibition: We are active in attending Exhibitions, like China Sourcing Fair in HongKong. We've built up business with lots of clients from all over the world.
3). Visit us: Welcome to visit our factory facility, we will show you a competitive company with high quality & reasonable price.
Product Tags:
|
|
for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors Images
|
